BEAMZ BT410
R3,364.00Lightweight Par 19x 10W RGBW
151.347
- 19x 10W 4-in-1 LEDs
- Circle pixel controlled
- RGBW Colour mixing with full saturation control
- Colour Temp. 2700 – 8000K
- CTB and CTO Colour
- Lightweight ABS housing
- 10 or 22 DMX channels
- Built-in programs
- DMX and Stand-alone mode
- Master/slave function
- 0-100% Dimmer
- Sound controlled
- Auto mode
- DMX in/output via 3-pin XLR
- Control panel with LED display
- Power-connector input/output
- IR remote control
- Double bracket also acts as floor stand
BEAMZ COB30RGBN LEDFLATPAR IP20 1X30W
R2,522.00The COB30RGB is a flat PAR equipped with a high power 30W COB (chip-on-board) LED and creates a 30° Beam Angle. The fixture offers a magnitude of static colours and colour mixing. Features built-in automated and sound-activated programs, strobe and electronic dimming for use on the fly, or create your own looks using the 8-channel DMX mode. The infra-red remote control simplifies operation and eliminates the bother of programming. Possibility of linking several units.
- 1x 30W COB LED
- Full spectrum of light with COB technology
- DMX and Stand-alone mode
- 3, 5 or 8 DMX channels
- Master/slave function
- Auto mode
- Pre-programmed shows
- DMX in/output via 3-pin XLR
- IEC-connector input/output
- Control panel with LED display
- Double bracket also acts as floor stand
BEAMZPRO LUCID 2.4 LED BAR IP20 4X30W RGBW
R7,114.00The LUCID is equipped with 4 or 8 high power COB LEDs that can be used for either wash effects or as a pixel controlled bar. With the latest COB technology it’s possible to create flawless RGBW colour mixing. The LUCID can either be used in stand-alone mode and run its preset programs in a certain speed or follows the music, thanks to the built-in microphone. But for full control you can also use a DMX controller to program this light effect into your shows. The LUCID can be placed on the floor by turning the bracket upside down, making it ideal for both fixed installations and rental.
- LED BAR with 4x 30W COB LEDs
- RGBW Colour mixing
- Individually controllable LEDs
- 3, 4, 5, 6, 8, 16 or 20 DMX channels
- IR remote control
- DMX and Stand-alone mode
- Master/slave function
- Sound activation with adjustable sensitivity
- Auto mode with adjustable speed
- DMX in/output via 3/5-pin XLR
- Power-connector input/output
- Aluminium housing
- Control panel with LCD display
- Bracket with Quick lock Omega
BEAMZ BBB612 LED BATTERY BAR IP20 6X12 RGBAWUV
R6,985.00The BeamZ BBB612 features 6 x 12W 6-in-1 RGBAW+UV LEDs in a convection-cooled enclosure and is equipped with single pixel control and built-in wireless DMX. With a full charge you will receive up to 20 hours of life with 5 hours needed to fully charge it back to full life with the built-in rechargeable lithium battery pack. You can now make your walls turn virtually any colour imaginable with this All-In-1 fixture.
- 6 x 12W 6-in-1 RGBAW-UV LEDs
- Single pixel control
- Up to 20 hours operating time (depending on intensity)
- Rapid recharge time of only 5 hours
- LED battery status indicator
- DMX and stand-alone mode
- 2, 6, 8, 11, 36 or 38 DMX channels
- IR remote control
- Sound activated with adjustable sensitivity
- Auto mode with adjustable speed
- Master/slave synchronization
- 0-100% Electronic Dimmer
- DMX in/output via RJ45
- Built-in wireless-DMX receive
BEAMZPRO STACOLOR135 LED FLOOD IP65 16X8W RGBA
R4,199.00The StarColor LED Flood Lights are made of high quality die-cast aluminium and tempered glass, IP65 waterproof grade, durable and antifreeze. These fixtures can be used at temperatures between -20 and +40 degrees Celsius and can withstand harsh weather conditions. By using the latest LED technology with RGBA colours and advanced lenses the StarColor Flood lights are able to create the right atmosphere for any occasion. Suitable for a wide range of applications from up-lighting a large venue or building to lighting up a stage for live performances.
- Compact flood light
- 16x 8W 4-in-1 LEDs
- RGBA colour mixing
- IP65 Rating, for indoor and outdoor use
- Magnetic diffusion filter available as an option
- Robust Aluminium housing
- DMX Channels: 4/8/10
- Pre-programmed shows
- No fan, convection cooling via cooling ribs
- 16-bit PWM dimming
- Colour: Black
- Control panel with LED display
- Waterproof connectors, DMX and Power Connector (P-Con) TR1 (in/out)
- Bracket with quick lock system
- For architectural and entertainment use
BEAMZPRO STACOLOR72
R3,621.00Flood Light 9x 8W RGBW Outdoor
150.732
- Compact Flood Light
- 9x 8W 4-in-1 LEDs
- RGBW colour mixing
- IP65 Rating, for indoor and outdoor use
- Magnetic diffusion filter available as an option
- Robust Aluminium housing
- White led color temperature: 6200K
- DMX Channels: 4/8/10
- Pre-programmed shows
- No fan, convection cooling via cooling ribs
- 16-bit PWM dimming
- Colour: Black
- Control panel with LED display
- Waterproof connectors, DMX and Power connector (P-Con) TR1 (in/out)
- Bracket with quick lock system
- For architectural and entertainment use
BEAMZ MULTIACE3
R3,305.00A rotating derby effect, 4 powerful UV LED lights and 25 white strobe effects, all in one device! This dynamic effect covers a large area and can be controlled by automatic or sound-to-light programs for an easy plug-and-play show. The MultiAce3 is great all-in-one unit perfect for mobile DJ setups and fixed installations, without the need to buy and install multiple effect units. Saves space, only 1 power cable needed.
SPECIFICATIONS:
- Light source : Single colour LED, 6-in-1 LED
- LED colours : Red, Green, Blue, Amber, White, Ultra Violet, Pink
- LED power : 3W
- Quantity of LEDs : 10
- LED power: Strobe : 0.5W
- Quantity of strobe LEDs : 25
- Beam angle : 25°
- DMX channels : 8
- DMX connector : 3-pin XLR
- Flash rate per second : 0 – 20Hz
- Modes : Automatic programs, DMX, Master/Slave
- Power consumption : 0.306 – 0.158A
- Power supply : 100-240VAC 50/60Hz
- Accessories : Mounting bracket, Power cable, Remote control
- Dimensions (L x W x H) : 225 x 225 x 170 mm
- Weight : 2.55kg
FEATURES:
- 3-in-1 Effect with Derby, UV LED and Strobe
- Derby effect with 6x 3W RGBAWP LEDs
- 4x 3W UV LEDs
- Stroboscope unit with 24x white SMD LEDs
- DMX and Stand-alone mode
- 8 DMX channels
- Master/slave function
- Sound activated with adjustable sensitivity
- Auto mode and preprogrammed shows
- IR remote control
- DMX in/output via 3-pin XLR
- Control panel with LED display
HYBRID HSS18.1 MKII STAGE SPOT PARCAN
R660.00Par can (RGB)
The Hybrid HSS 18.1 MKII is a basic but professional stage lighting model. It includes single RGB LEDs and gives off bright and colourful beams. Ideal for occasions such as church services, weddings, pool parties, and house parties. Decorate your walls, trees, and surroundings to create a specific atmosphere for your events.
Slim, flat par can with 18 x 3W RGB (R:3, G:3, B:3) colour, high brightness LEDs
Power Consumption: 36W
Beam Angle: 25°
3/7 DMX channels
HYBRID HSS COB 2B MKII
R5,160.00Crowd Blinder
The Hybrid HSS COB2B MKII is an electrifying audience blinder and strobe with two high-power CW+WW COB LEDs housed in static pods. It’s the go-to choice for high energy, automated strobe and blinding effects. The Hybrid HSS COB2B has a 0-100% linear curve and is perfect for giving your audience a memorable show!
Technical Specifications
DMX Modes: 8 channels
4-digit digital LED display
Operation Modes: Sound-to-light, strobe, auto, DMX512, master/slave
Power Consumption: 180W
Light source: 2 x CW+WW LEDs
BEAMZ LCB-300 LED BAR 36 X3W RGBW
R3,880.00150.220
- 36x 3W 4-in-1 LEDs
- RGBW colour mixing
- 12 separate controllable sections
- 56 Pre-programmed shows
- 2 Sound modes with adjustable sensitivity
- Auto mode
- 4, 6, 9, 48 or 52 DMX channels
- RDM controllable
- Linear dimming 0-100%
- DMX and Stand-alone mode
- Master/slave function
- DMX in/output via 3-pin XLR
- Control panel with LED display
- P-Con in/output
- Including matte cover tube
- Including Quick Lock coupling system
Beamz LCB224 LED Bar 224X SMD RGB
R2,845.00Features
- 224x SMD RGB LEDs
- 3, 5, 8, 24, 48 or 53 DMX channels
- 16 Sections controllable
- DMX and Stand-alone mode
- Master/slave function
- Sound activated with adjustable sensitivity
- 54 Built-in effects
- Pre-programmed shows
- 25 Colour pre-sets
- 24 Effect patterns
- DMX in/output via 3-pin XLR
- IEC-connector input/output
HYBRID HSS 7.4 MKII
R1,104.00Slim Par can (RGBW)
The HSS 7.4 MKII Slim Par (RGBW) is a high-performance LED wash light designed for dynamic color mixing. Featuring four vibrant color channels (Red, Green, Blue, and White), this versatile fixture delivers seamless, rich hues, perfect for a range of lighting applications including stage, wash, and accent lighting. Built with a robust plastic housing, the HSS 7.4 MKII ensures long-lasting reliability, making it an ideal choice for professionals seeking both performance and durability.
Technical Specifications
Slim, flat Par can with 7 x 10W RGBW colour, high-brightness LEDs
Beam Angle: 25°
DMX Channels: 8 DMX channels
Weight: 0.85kg
Operation modes: Sound-to-light, strobe, auto, DMX512, master/slave
BEAMZ SB200 STAGE BLINDER 2WAY 2X50W LED
R4,024.00Stage Blinder 2x 50W COB LED
Features
150.452
• 2x 50W COB LED
• 2-in-1: Stage Blinder and Strobe
• Warm white LEDs
• 6 DMX channels
• DMX in/output via 3-pin XLR
• DMX, Sound activation and Stand-alone mode
• Powerconnector in/outpu
BEAMZ SLIMPAR35 12x 3W 3in1 RGB LEDS DMX
R1,364.00Slimpar
Features
• 12x 3W 3-in-1 LEDs
• RGB Colour mixing
• Pre programmed shows
• 3, 4 or 7 DMX channels
• DMX and Stand-alone mode
• Sound activated with adjustable sensitivity
• Auto mode with adjustable speed
• DMX in/output via 3-pin XLR
• Master/slave function
• Control panel with LED display
Beamz BBP96s Battery Uplight Par
R6,611.00Product Description
The BBP96S is a battery operated par ideal for use as an uplighter equipped with 6x 12W 6-in-1 LEDs. The BBP96S comes fitted with an 9.6Ah battery which will last over 9 hours when fully charged. The adjustable foot can be fixed in different angles for angular placement of the par. With built-in wireless-DMX receiver.
- 6x 12W 6-in-1 RGBAW-UV LEDs
- Built-in wireless-DMX receiver
- Integrated folding foot for angular placement
- Up to 9 hours operating time (depending on intensity)
- Rapid recharge time of only 3 hours
- DMX and stand-alone mode
- 6 or 10 DMX channels
- IR remote control
- Sound activated with adjustable sensitivity
- Auto mode with adjustable speed
- Master/slave synchronization
- 0-100% Electronic Dimmer
- DMX in/output via RJ45
Beamz BWA63 Alluminium IP65 6x3W 3-In-1 LED PAR RGB
R1,911.00Beamz BWA63 Aluminium IP65 6x3W 3-In-1 LED PAR RGB
150.765
The AluPar63 is equipped with 6x 3W 3-in-1 LEDs for an astonishing light output. It operates very easy; you?ll only have to plug it in to a mains outlet and you?re ready to go. This indoor/outdoor aluminium par works completely stand-alone and is controlled by built-in automatic programs or via auto mode. There are no internal cooling fans in these PAR can, which mean absolutely zero noise. It?s a perfect effect for mobile DJ?s, live performances and all other applications but can also be mounted in a fixed indoor/outdoor light plan for bowling areas, discos, clubs etc.
- 6x 3W 3-in-1 LEDs
- RGB Colour mixing
- Waterproof IP65 for outdoor use
- Pre-programmed shows
- Stand-alone mode
- Auto mode
- Aluminium housing
- Light source 3-in-1 LED
- LED colours Red, Green, Blue
- LED power 3
- Quantity of LEDs 6
- Dispersion 23
- Illuminance 1.300 lx @ 1m
- Modes Automatic programs, Manual
- IP rating IP65
- Cooling Convection
- Power plug Fixed power lead
- Power consumption 0.08 – 0.05A
- Power supply 100-240VAC 50/60Hz
Chauvet Ovation F-55FC
R2,105.00Light – Theatre
Ovation F-55FC is a full color RGBAL LED (3-inch) inkie Fresnel-style fixture ideal for short throw applications in television studios and theatres. Our handy Virtual Color Wheel and Color Temperature presets are shared from our other full color Ovation fixtures. A manual zoom with a 18° – 87° field range allows you to add a beautifully soft field of light where needed.
Compact, full color fresnel for tight spaces and on-location lighting
16-bit dimming resolution for smooth fades
Soft and even field of light
Virtually silent operation for use in any situation
Manually controlled variable zoom range between 18° to 87°
Chauvet LED Slimpar tri 12u
R3,096.00Light – LED, PAR
The SlimPAR Tri 12 IRC is a low profile, high-power LED Par designed for any application where wash lights are needed. Twelve tri-colour LEDs make this the perfect front light by eliminating multi-coloured shadows and providing a smooth, even output. The addition of the IRC-6 (Infrared Remote Control) allows simple operation and eliminates the hassle of programming. With a 100% convection cooling system, there is no fan noise to distract the audience.
Highlights
• Low-profile, tri-colour LED Par with built-in infrared (IR) technology
• Nearly eliminate multi-coloured shadows with high-power, tri-colour LEDs
• Convenient access to RGB colour mixing and static colours with or without DMX.
• Emits a smooth and even output perfect for front light applications.
• Flicker-free operation suitable for on-camera use
• Increase stand-alone versatility with multiple user-configurable settings.
• Save time running cables and extension cords by power linking multiple units.
• Access built-in automated programs via IRC-6 remote, Master/Slave or DMX
• Easily control static colours and automated programs with the optional IRC-6 remote
• Fits best in the CHS-30 VIP Gear Bag
Specifications
• DMX Channels: 3 or 7
• DMX Connectors: 3-pin XLR
• Light Source: 12 LEDs (tricolour RGB) 3 W (1,050 mA), 50,000 hours life expectancy
• PWM Frequency: 1,200 Hz
• Beam Angle: 20°
• Field Angle: 34°
• Illuminance: 2,662 lux @ 2 m
• Power Linking: 15 units @ 120 V; 26 units @ 230 V.
• Input Voltage: 100 to 240 VAC, 50/60 Hz (auto-ranging)
• Power and Current: 64 W, 0.5 A @ 120 V, 60 Hz
67 W, 0.3 A @ 230 V, 50 Hz
• Weight: 5.7 lb (2.6 kg)
• Size: 11.5 x 9.3 x 4.6 in (292 x 235 x 115 mm)
Chauvet EVE E100Z
R10,431.00Light – Led, Spot
Eve E-100Z Is A Powerful Spot Fixture Featuring Sharp Pattern Projection With A 100 W Warm White Led Light Source. It’S Designed For Mobile And Installation Applications. This Versatile Fixture Works With Metal Or Glass Gobos To Create Incredible Gobo Or Pattern Details. The Manual Zoom And Framing Shutters Make It Simple To Control Beams.
Chauvet eve p-130 rgb
R5,155.00Light – Theatre
Robust wash light designed for mobile lighting professionals
EVE P-130 RGB is a robust RGB wash light designed for mobile lighting entertainers. Interchangeable magnetic lenses are included to alter the beam to desired angles. EVE P-130 RGB has a sturdy cast aluminum housing that provides extra strength without added weight. D-Fi USB compatibility is also onboard providing the option for wireless master/slave or DMX control. Its fanless design ensures 100% silent operation and the unit’s high-frequency LED dimming offers flicker-free operation perfect for video use. EVE P-130 RGB has a built-in gel frame holder and 6¼-inch accessory slot to hold barn doors. Flexible control connection options are onboard with both 3- and 5-pin DMX connectors. PowerCON®-compatible power input/output connections allow secure power linking.
Chauvet eve p-140 vw
R7,320.00Light – Theatre
Robust, variable-white wash light designed for mobile lighting professionals
EVE P-140 VW is a variable white wash light featuring cool white, warm white and amber LEDs. EVE P-140 VW is a D-fi USB compatible fixture providing the option to control the fixture wirelessly in master/slave mode or with DMX control. This sturdy wash light has a built-in gel frame holder and a 6 ¼ – inch accessory slot to hold optional barn doors. EVE P-140 VW comes with interchangeable lenses that attach magnetically to alter the beam for added lighting flexibility. PowerCON power connections means secure power connections and power linking. The fixture operates silently due to its fanless design and its flicker-free output make EVE P-140 VW perfect for on-camera use. Both 3- and 5-pin DMX connectors provide added control connection flexibility.
Beamz BBP94W
R4,481.00Light – Parcan, battery
The BBP94W is a battery operated par ideal for use as an uplighter. The BBP94W comes fitted with an 8Ah battery which will last over 9 hours when fully charged. The adjustable foot can be fixed in different angles for angular placement of the par. With built-in wireless-DMX receiver.
Lightsource: 6-in-1 LED
LED Colours: Red, Green, Blue, Amber, White, Ultra Violet
LED Power: 12
Quantity of LEDs: 4
Illuminance: 3365
Beam angle (degrees): 26
Field angle (degrees): 47
Flash rate per second: 0 – 20Hz
IP rating: IP20
DMX Channels: 6, 10
DMX Connector: RJ45
Battery: 12.6V – 7.8Ah
Power consumption: 0.3 – 0.16A
Power Supply: 100-240VAC 50/60Hz (12V Adapter)
Power Plug: External Power Supply
Accessories: Power Cable, Remote control
Dimensions: (L x W x H) 130 x 130 x 120mm
Weight : 1.6kg
Beamz BAC306
R2,777.00Light – Parcan
The BeamZ BAC306 is a slimline Aluminium LED ProPar, created by the latest LED technology. It includes 12x 12W 6-in-1 LEDs (RGBAW-UV). Highly efficient, natural convection cooling thanks to the attractive cast aluminium housing with heat sink design. There are no internal cooling fans in these PAR cans, which mean absolutely zero noise. The 4 push button LED menu allows for easy access to the functions including DMX, master/slave, sound activation and the stand alone function. Equipped with IEC in/out and XLR 3-pin in/out for daisy chaining multiple units together.
Beam angle: 27°
Field angle: 51°
No. of colours 6:Colours: RGBWA-UV
No. of LEDs: 12x 12w
Flash rate per second: 1-24Hz
DMX channels: 3, 5, 6 or 11
DMX connection: 3-pin XLR
Mode: DMX, Auto, Sound active, Master-Slave and IRC
Power supply: 110-240VAC, 50-60Hz, 0.6-0.3A
Display: LED
Dimensions: 240 x 260 x 87mm
Weight: 2.1kg
Beamz BAC302
R1,745.00Light – Parcan
The BeamZ BAC302 is a slimline Aluminium LED ProPar, created by the latest LED technology. It includes 6x 12W 6-in-1 LEDs (RGBAW-UV). Highly efficient, natural convection cooling thanks to the attractive cast aluminium housing with heat sink design. There are no internal cooling fans in these PAR cans, which mean absolutely zero noise. The 4 push button LED menu allows for easy access to the functions including DMX, master/slave, sound activation and the stand alone function. Equipped with IEC in/out and XLR 3-pin in/out for daisy chaining multiple units together.
Lightsource: 6-in-1 LED
LED Colours: Red, Green, Blue, Amber, White, Ultra Violet
LED Power: 12
Quantity of LEDs: 6
Beam angle (degrees): 26
Field angle (degrees): 50
Illuminance: 2600
Flash rate per second: 0 – 24Hz
DMX Channels: 3, 5, 6, 11
DMX Connector: 3-pin XLR
Modes: Automatic programs, DMX, Sound to Light
Power Plug: IEC
Power consumption: 0.3 – 0.1A
Power Supply: 110-240VAC 50/60Hz
Dimensions: (L x W x H) 200 x 200 x 83
Weight: 1.3kg
Accessories: Mounting bracket, Remote control