Wharfedale Replacement Woofer for EVO X 15
R1,336.00Wharfedale Replacement Woofer for EVO X 15
BEYMA 18LEX1200FE
R4,512.00High power handling and low distortion 18” subwoofer
● Exclusive Malt Cross® Technology Cooling System
● Low power compression losses
● High sensitivity: 97 dB (1W / 1m)
● FEA optimized ceraminc magnetic circuit
● Ultra low air noise
● Optimized linear behaviour
Weatherproof cone with treatment for both sides
● Double silicone spider
● 4” DUO double layer in/out copper voice coil
● Aluminium demodulating ring
● Extended controlled displacement: Xmax ± 11 mm
● 48 mm peak-to-peak excursion before damage
● Optimized for direct radiation and band-pass subwoofer
applications
Beyma 15LX60V2
R3,954.00FEATURES
● High power handling: 700 WAES
● High sensitivity: 98 dB (1W / 1m)
● FEA optimized magnetic circuit
● CONEX spider for higher resistance and consistency LX60 Series
● Weatherproof cone with treatment for both sides of the cone
● 4” DUO double layer in/out voice coil
● Extended controlled displacement: Xmax ± 9 mm
● 47 mm peak-to-peak excursion before damage
Beyma 12MC500
R2,778.00The Beyma 12MC500 is a 12″ mid-bass driver designed for professional audio systems that require high power handling and efficiency. Its robust construction and advanced Maltcross cooling technology make it ideal for 2- or 3-way PA systems and line arrays.
features
- Maltcross cooling system reduces power compression
- Aluminum demodulating ring minimizes distortion
- ±8 mm Xmax allows for extended linear excursion
- Weatherproof cone treatment on both sides for increased durability
- 40 mm peak-to-peak excursion before damage ensures mechanical reliability
- Optimized for 2- or 3-way PA systems and line arrays
- 2.5″ copper wire voice coil enhances thermal stability
Celto Acoustique 6CXF150
R1,680.00Replacement Coaxial speaker 6CXF150 LF+HF for iFix6 G2
BEYMA 8WRS300 8OHM
R2,138.00Key Features
- High power handling: 600 W program power
- 2” copper wire voice coil
- High sensitivity: 95 dB (1W / 1m)
- FEA optimized ceramic magnetic circuit
- Designed With Mmss Technology
- Low harmonic distortion and linear response
- Waterproof cone with treatment on both sides of the cone
- Optimized pressed steel frame
- Extended controlled displacement: Xmax ± 6 mm
- 32 mm peak-to-peak excursion before damage
- Wide range of applications of low and mid-low frequencies
BEYMA 15MC500
R3,024.00FEATURES
- High power handling: 1.000 W program power
- 2,5” copper wire voice coil
- Malt Cross® Cooling System
- Low power compression losses
- High sensitivity: 98 dB
- FEA optimized magnetic circuit
- Aluminium demodulating ring MC Series
- Weatherproof cone treatment for both sides of the cone
- Extended controlled displacement: Xmax ± 8 mm
- 40 mm peak-to-peak excursion before damage
- Weight 6,2 kg
- Optimized for 2 or 3 way PA systems and line array for ultimate professional applications
Celto Acoustique 18NGW1200
R3,552.00As a world leading manufacturer, CELTO meticulously engineered this premium woofer to offer top class performance, consistency and long-term reliability. Featuring an exclusive blend of Canadian pulp cone reinforced by KEVLAR fibre, this high-efficiency driver has been designed to provide deep and precise low frequency reproduction in compact vented cabinets.
The 18NGW1200 features the beautifully crafted CELTO low turbulence aluminium basket with a flawless powder-coated finish, robust push terminal connectors, and 240°C thermal class voice coil (500°C peak), guaranteeing the longevity of this product.
With extensive experience serving the African market since 2010, CELTO designed the new NGW series specifically to withstand the high physical and electrical demands of our continent, including but not limited to an anti-shift motor system assembly and a dual-layer glue rivet process to avoid broken spiders.
FEATURES
Long excursion, Low distortion design
Deep, clean and punchy sound
Water resistant KEVLAR® loaded paper cone
Optimized parameters for compact cabinets
SPECIFICATIONS
Nominal diameter = 460mm (18 inch)
Nominal Impedance = 8 ohms
Power handling = 1200W RMS (AES Standard)
Sensitivity = 97 dB / 1W / 1m
Voice coil diameter = 4 inch (100mm)
Voice coil height Hvc = 26mm
Voice coil air gap Hag = 12mm
Xmax (Hvc-Hag)/2 + Hag/4 = ±10mm
Xmech (peak-peak) = 50mm
Voice coil winding = 2 layers IN / OUT
Voice coil material = 240°C Thermal Class Copper
Voice coil former = BAF fiberglass
Suspension = Triple roll, impregnated fabric
Spider = dual with silicon damping, NOMEX®
Cone = fibre loaded, waterproof treated paper
Chassis = Die Cast Aluminium
Magnet = Ø220mm Y35 Ferrite
MOUNTING & SHIPPING
Overall diameter = 470 mm
Bolt circle diameter = 445 mm
Baffle cutout diameter = 422 mm
Flange and gasket thickness = 13 mm
Overall depth = 212 mm
Net weight = 13 kg
Shipping weight = 15 kg
Shipping box = 500x455x265 mm
T&S PARAMETERS
F(s) = 35 Hz
Q(ms) = 10.325
V(as) = 206 litres
M(ms) = 218 grams
R(ms) = 4.568 kg/s
S(d) = 1225 sq.cm
V(d) = 1.225 liters
R(e) = 5.7 ohms
Q(es) = 0.431
C(ms) = 0.0962 mm/N
Q(ts) = 0.416
L(e) 1kHz = 1.98 mH
BL = 24.9
n(0) = 2.01%
Celto Acoustique 21SW1800-8
R5,952.00The CELTO 21SW1800-8 is a new 21” bass driver stocked by BC Electronics. As usual with CELTO products, there has been absolutely no compromise in design, selection of materials used, manufacturing and quality control. This 21” driver features a beautifully finished powder coated die cast aluminium basket, Japanese wire 240°C voice coil, and a KEVLAR® loaded Canadian pulp paper cone with waterproof coating on both sides. This speaker has been designed to be ideal for more compact cabinet designs.
FEATURES
Deep, Clean, and punchy sound
Extra Long excursion design
DCS (Deflective Cooling System)
Water resistant KEVLAR® loaded paper cone
Optimized parameters for compact cabinets
SPECIFICATIONS
Nominal diameter = 460mm (18 inch)
Nominal Impedance = 8Ω
Power handling = 1800W RMS (AES Standard)
Sensitivity = 98dB / 1W / 1m
Voice coil diameter = 115mm
Voice coil height Hvc = 34mm
Voice coil air gap Hag = 15mm
Xmax (Hvc-Hag)/2 + Hag/4 = ±13.25mm
Xmech (peak-peak) = 62mm
Voice coil winding = 2 layers IN / OUT
Voice coil material = IEC grade Copper
Voice coil former = T600 fiberglass
Suspension = Triple roll, impregnated fabric
Spider = dual with silicon damping, NOMEX®
Cone = fiber loaded, waterproof treated paper
Chassis = Die Cast Aluminum
Magnet = Ø250mm Y35 Ferrite
MOUNTING & SHIPPING
Overall diameter = 546mm
Bolt circle diameter = 514-520mm
Baffle cutout diameter = 494mm
Flange and gasket thickness = 14mm
Overall depth = 229mm
Net weight = 16kg
Shipping weight = 20kg
Shipping box = 560x560x300mm
T&S PARAMETERS
F(s) = 30.3Hz
Q(ms) = 8.4
V(as) = 281ℓ
M(ms) = 355g
R(ms) = 8.232kg/s
S(d) = 1632cm²
V(d) = 2.448ℓ
R(e) = 5.36Ω
Q(es) = 0.402
C(ms) = 0.074mm/N
Q(ts) = 0.384
L(e) 1kHz = 2.20mH
BL = 30.3
n(0) = 2.00%
Celto Acoustique 12PF600-8
R2,766.00The CELTO 12PF600-8 forms part of the new range of loose mid-bass drivers stocked by BC Electronics. As usual with CELTO products, there has been absolutely no compromise in design, selection of materials used, manufacturing and quality control. This 12” driver features a beautifully finished powder coated die cast aluminium basket, 240°C PI wire voice coil, premium Canadian pulp paper cone with waterproof coating on both sides, high purity and temperature DMEGC Y30 magnate, and secure square push terminals able to accommodate 5mm diameter connecting wire.
FEATURES
Balanced tonality ideal for 2-way speakers
High efficiency
Water resistant KEVLAR® loaded paper cone
Optimized parameters for compact cabinets
SPECIFICATIONS
Nominal diameter = 320mm (12 inch)
Nominal Impedance = 8Ω
Power handling = 500W RMS (AES Standard)
Sensitivity = 97dB / 1W / 1m
Voice coil diameter = 75mm
Voice coil height Hvc = 24mm
Voice coil air gap Hag = 10mm
Xmax (Hvc-Hag)/2 + Hag/4 = ±9.5mm
Xmech (peak-peak) = 42mm
Voice coil winding = 2 layers IN / OUT
Voice coil material = 240°C Thermal Class CCAW
Voice coil former = T600 fiberglass
Suspension = Triple roll, impregnated fabric
Spider = single, cold formed NOMEX®
Cone = fiber loaded treated paper
Chassis = Die Cast Aluminum
Magnet = Ø180mm Y30 Ferrite
MOUNTING & SHIPPING
Overall diameter = 315mm
Bolt circle diameter = 302mm (8*M5)
Baffle cutout diameter = 282mm
Flange and gasket thickness = 10mm
Overall depth = 143mm
Net weight = 7kg
Shipping weight = 8kg
Shipping box = 340x340x195mm
T&S PARAMETERS
F(s) = 51Hz
Q(ms) = 7.472
V(as) = 66ℓ
M(ms) = 64g
R(ms) = 2.74kg/s
S(d) = 552cm²
V(d) = 0.524ℓ
R(e) = 5.28Ω
Q(es) = 0.452
C(ms) = 0.152mm/N
Q(ts) = 0.424
L(e) 1kHz = 1.08mH
BL = 15.5
n(0) = 1.9%
Celto Acoustique 15PF800-8
R3,228.00The CELTO 15PF800-8 forms part of the new range of loose mid-bass drivers stocked by BC Electronics. As usual with CELTO products, there has been absolutely no compromise in design, selection of materials used, manufacturing and quality control. This 15” driver features a beautifully finished powder coated die cast aluminium basket, Japanese wire 240°C voice coil, KEVLAR® loaded Canadian pulp paper cone with waterproof coating on both sides, high purity and temperature DMEGC Y35 magnate, and secure square push terminals able to accommodate 5mm diameter connecting wire.
FEATURES
Balanced tonality ideal for 2-way speakers
High efficiency
Water resistant KEVLAR® loaded paper cone
Optimized parameters for compact cabinets
SPECIFICATIONS
Nominal diameter = 380mm (15 inch)
Nominal Impedance = 8Ω
Power handling = 800W RMS (AES Standard)
Sensitivity = 98dB / 1W / 1m
Voice coil diameter = 91mm
Voice coil height Hvc = 22mm
Voice coil air gap Hag = 10mm
Xmax (Hvc-Hag)/2 + Hag/4 = ±8.5mm
Xmech (peak-peak) = 44mm
Voice coil winding = 2 layers IN / OUT
Voice coil material = 240°C Thermal Class CCAW
Voice coil former = T600 fiberglass
Suspension = Triple roll, impregnated fabric
Spider = single, cold formed NOMEX®
Cone = fiber loaded treated paper
Chassis = Die Cast Aluminum
Magnet = Ø200mm Y30 Ferrite
MOUNTING & SHIPPING
Overall diameter = 400mm
Bolt circle diameter = 378mm (8*M5)
Baffle cutout diameter = 353mm
Flange and gasket thickness = 10mm
Overall depth = 164mm
Net weight = 8.5kg
Shipping weight = 10kg
Shipping box = 410x410x235mm
T&S PARAMETERS
F(s) = 44Hz
Q(ms) = 9.304
V(as) = 126ℓ
M(ms) = 108g
R(ms) = 3.21kg/s
S(d) = 855cm²
V(d) = 0.727ℓ
R(e) = 5.4Ω
Q(es) = 0.495
C(ms) = 0.121mm/N
Q(ts) = 0.47
L(e) 1kHz = 1.26mH
BL = 18.05
n(0) = 2.09%
Wharfedale Loose Driver For Evpx15/M/Pm Zd644
R1,214.00Wharfedale Pro 15″ 300 watt RMS woofer/D644
Wharfedale Loose Woofer For Titan12 Passive
R1,336.00Loose Woofer For Titan12 Passive
Celto Acoustique 15NG500-8
R2,227.00The CELTO 15NG500-8 forms part of the new range of loose mid-bass drivers stocked by BC Electronics. As usual with CELTO products, there has been absolutely no compromise in design, selection of materials used, manufacturing and quality control. This 15” driver features a beautifully finished powder coated die cast aluminium basket, 240°C PI wire voice coil, premium Canadian pulp paper cone with waterproof coating on both sides, high purity and temperature DMEGC Y30 magnate, and secure square push terminals able to accommodate 5mm diameter connecting wire.
FEATURES
Balanced tonality ideal for 2-way speakers
High efficiency
Water resistant cone
Optimized parameters for compact cabinets
SPECIFICATIONS
Nominal diameter = 380mm (15 inch)
Nominal Impedance = 8Ω
Power handling = 500W RMS (AES Standard)
Sensitivity = 98dB / 1W / 1m
Voice coil diameter = 75mm
Voice coil height Hvc = 21mm
Voice coil air gap Hag = 9mm
Xmax (Hvc-Hag)/2 + Hag/4 = ±8.25mm
Xmech (peak-peak) = 44mm
Voice coil winding = 2 layers IN / OUT
Voice coil material = 240°C Thermal Class Copper
Voice coil former = T600 fiberglass
Suspension = Triple roll, impregnated fabric
Spider = single, cold formed NOMEX®
Cone = fiber loaded treated paper
Chassis = Die Cast Aluminum
Magnet = Ø190mm Y30 Ferrite
MOUNTING & SHIPPING
Overall diameter = 400mm
Bolt circle diameter = 378mm (8*M5)
Baffle cutout diameter = 422mm
Flange and gasket thickness = 10mm
Overall depth = 164mm
Net weight = 7.5kg
Shipping weight = 9kg
Shipping box = 420x380x210mm
T&S PARAMETERS
F(s) = 45Hz
Q(ms) = 7.228
V(as) = 131ℓ
M(ms) = 105g
R(ms) = 6.92kg/s
S(d) = 881cm²
V(d) = 0.705ℓ
R(e) = 5.78Ω
Q(es) = 0.491
C(ms) = 0.119mm/N
Q(ts) = 0.46
L(e) 1kHz = 1.08mH
BL = 18.5
n(0) = 2.3%
Beyma 15Mcb700 8R
R4,722.00Low & Mid Frequency Transducer
● High power handling: 1.400 W program power
● Exclusive Malt Cross® Technology Cooling System
● Low power compression losses
● High sensitivity: 99 dB (1W / 1m)
● FEA optimized magnetic circuit
● Optimized non-linear behaviour
KEY FEATURES
● Weatherproof cone treatment on both sides of the cone
● 3” DUO double layer in/out copper voice coil
● Aluminium demodulating ring
● Extended controlled displacement: Xmax ± 7 mm
● 45 mm peak-to-peak excursion before damage
● Optimized for low frequency and mid-bass applications
Beyma 15Lex1000Fe
R4,194.00● High power handling and low distortion 15” subwoofer
● Exclusive Malt Cross® Technology Cooling System
● Low power compression losses
● High sensitivity: 97 dB (1W / 1m)
● FEA optimized ceramic magnetic circuit
● Ultra low air noise
● Optimized linear behaviour
● Weatherproof cone with treatment for both sides
● 3,5” DUO in/out copper voice coil
● Extended controlled displacement: Xmax ± 11 mm
● 51 mm peak-to-peak excursion before damage
● Optimized for direct radiation and band-pass subwoofer
applications
Beyma 15MCS500 8R
R3,024.00KEY FEATURES
- High power handling: 1000 W program power
- 2,5” copper wire voice coil
- Malt Cross® Cooling System
- Low power compression losses
- High sensitivity: 98 dB (1W / 1m) MC Series
- Optimized pressed steel frame ● FEA optimized magnetic circuit
- Weatherproof cone treatment for both sides of the cone
- Optimized for 2 or 3 way PA systems and line array applications
Beyma 15P1000Fe V2 8Ohm
R5,328.00KEY FEATURES
● High power handling: 2.000 W program power
● 4” copper voice coil
● High sensitivity: 98 dB (1W / 1m)
● FEA optimized magnetic circuit
● Low power compression losses
● Weatherproof cone treatment for both sides of the cone
● CONEX spider
● 52 mm peak-to-peak excursion before damage
● High excursion capabilities: Xmax ± 8 mm
● Low frequency extension and high control
Beyma 12P80FE V2
R4,552.00KEY FEATURES
● 700 WAES power handling capacity
● High sensitivity: 99 dB (1W / 1m)
● Wide usable frequency range
● Low harmonic distortion
● Low resonant frequency: 48 Hz
● Low power compression losses
● Weatherproof cone with treatment for both sides
● 4” DUO double layer in/out aluminium voice coil
● Conex spider
● Extended controlled displacement: Xmax ± 7,5 mm
● 52 mm peak-to-peak excursion before damage
Celto Acoustique 18SW1500-8 loose driver
R4,794.00The SW series of subwoofers are the flagship of the CELTO range of loose bass transducers. There has been absolutely no compromise in design, selection of the materials used, manufacturing and the QC process.
The 18SW1500 is a beautifully finished ultra-thick powder coated aluminum die-cast woofer, with a solid <0.1% carbon CNC machined steel T-Yoke, French bobbin with Japanese wire 240°C voice coil, Japanese / USA damper, water resistant fiber loaded Canadian pulp paper cone, high grade Y35 flaw-free ferrite magnet and a robust 5mm square spring terminal connecting block.
Features
- Ultra-high excursion, Low distortion design
- Split winding voice coil
- DCS (Deflective cooling system)
- Water resistant Kevlar loaded paper cone
- Optimized parameters for compact cabinet designs
Specifications
- Nominal diameter: 460mm (18″)
- Nominal impedance: 8 ohms
- Power handling: 1500W RMS (AES Standard)
- Sensitivity: 97dB / 1W / 1m
- Voice coil diameter: 4″ (100mm)
- Voice coil height Hvc: 34mm
- Voice coil air gap Hag: 15mm
- Xmax (Hvc-Hag)/2 + Hag/4: +/- 13.25mm
- Xmech (peak-peak): 62mm
- Voice coil winding: 2 layer IN/OUT
- Voice coil material: IEC grade copper
- Voice coil former: T600 fiberglass
- Suspension: Triple roll, impregnated fabric
- Spider: Dual with silicon damping, NOMEX
- Cone: Fiber loaded treated paper
- Chassis: Die-cast aluminum
- Magnet: 230mm diameter Y35 ferrite
Mounting & Shipping
- Overall Diameter: 470mm
- Bolt circle diameter: 445mm
- Baffle cutout diameter: 422mm
- Flange & gasket thickness: 13mm
- Overall depth: 225mm
- Net weight: 16Kg
- Shipping weight: 19Kg
- Shipping dimensions: 460x460x280mm
T&S Parameters
- F(s): 34Hz
- Q(ms): 9.763
- V(as): 182 liters
- M(ms): 248 grams
- R(ms): 5.553 Kg/s
- S(d): 1225 sq.c+C5m
- V(d): 1.716 liters
- R(e): 5.75 ohms
- Q(es): 0.406
- C(ms): 0.0853 mm/N
- Q(ts): 0.39
- L(e): 1KHz: 1.98mH
- BL: 27.5
- n(0): 1.8%
Celto Acoustique 18SW1000 loose driver
R3,372.00The SW series of subwoofers are the flagship of the CELTO range of loose bass transducers. There has been absolutely no compromise in design, selection of the materials used, manufacturing and the QC process.
The 18SW1000 is a beautifully finished ultra-thick powder coated aluminum die-cast woofer, with a solid <0.1% carbon CNC machined steel T-Yoke, French bobbin with Japanese wire 240°C voice coil, Japanese / USA damper, water resistant fiber loaded Canadian pulp paper cone, high grade Y35 flaw-free ferrite magnet and a robust 5mm square spring terminal connecting block.
Features
- High excursion, Low distortion design
- Deep, clean and puchy bass
- DCS (Deflective cooling system)
- Water resistant Kevlar loaded paper cone
- Optimized parameters for compact cabinet designs
Specifications
- Nominal diameter: 460mm (18″)
- Nominal impedance: 8 ohms
- Power handling: 1000W RMS (AES Standard)
- Sensitivity: 98dB / 1W / 1m
- Voice coil diameter: 3.6″ (91mm)
- Voice coil height Hvc: 25mm
- Voice coil air gap Hag: 10mm
- Xmax (Hvc-Hag)/2 + Hag/4: +/- 10mm
- Xmech (peak-peak): 46mm
- Voice coil winding: 2 layer IN/OUT
- Voice coil material: IEC grade copper
- Voice coil former: T600 fiberglass
- Suspension: Triple roll, impregnated fabric
- Spider: Dual with silicon damping, NOMEX
- Cone: Fiber loaded treated paper
- Chassis: Die-cast aluminum
- Magnet: 220mm diameter Y35 ferrite
Mounting & Shipping
- Overall Diameter: 470mm
- Bolt circle diameter: 445mm
- Baffle cutout diameter: 422mm
- Flange & gasket thickness: 13mm
- Overall depth: 210mm
- Net weight: 9.7Kg
- Shipping weight: 12Kg
- Shipping dimensions: 460x460x280mm
T&S Parameters
- F(s): 35Hz
- Q(ms): 6.224
- V(as): 250liters
- M(ms): 195grams
- R(ms): 6.92 Kg/s
- S(d): 1288 sq.c+C5m
- V(d): 1.28 liters
- R(e): 5.57 ohms
- Q(es): 0.497
- C(ms): 0.101 mm/N
Q(ts): 0.46 - L(e): 1KHz: 1.73mH
- BL: 22
- n(0): 2.08%
Celto Acoustique 18SW1200 loose driver
R4,122.00The SW series of subwoofers are the flagship of the CELTO range of loose bass transducers. There has been absolutely no compromise in design, selection of the materials used, manufacturing and the QC process.
The 18SW1200 is a beautifully finished ultra-thick powder coated aluminum die-cast woofer, with a solid <0.1% carbon CNC machined steel T-Yoke, French bobbin with Japanese wire 240°C voice coil, Japanese / USA damper, water resistant fiber loaded Canadian pulp paper cone, high grade Y35 flaw-free ferrite magnet and a robust 5mm square spring terminal connecting block.
Features
- High excursion, Low distortion design
- Deep, clean and puchy bass
- DCS (Deflective cooling system)
- Water resistant Kevlar loaded paper cone
- Optimized parameters for compact cabinet designs
Specifications
- Nominal diameter: 460mm (18″)
- Nominal impedance: 8 ohms
- Power handling: 1200W RMS (AES Standard)
- Sensitivity: 97dB / 1W / 1m
- Voice coil diameter: 4″ (100mm)
- Voice coil height Hvc: 26mm
- Voice coil air gap Hag: 12mm
- Xmax (Hvc-Hag)/2 + Hag/4: +/- 10mm
- Xmech (peak-peak): 50mm
- Voice coil winding: 2 layer IN/OUT
- Voice coil material: IEC grade copper
- Voice coil former: T600 fiberglass
- Suspension: Triple roll, impregnated fabric
- Spider: Dual with silicon damping, NOMEX
- Cone: Fiber loaded treated paper
- Chassis: Die-cast aluminum
- Magnet: 220mm diameter Y35 ferrite
Mounting & Shipping
- Overall Diameter: 470mm
- Bolt circle diameter: 445mm
- Baffle cutout diameter: 422mm
- Flange & gasket thickness: 13mm
- Overall depth: 212mm
- Net weight: 13Kg
- Shipping weight: 15Kg
- Shipping dimensions: 460x460x280mm
- T&S Parameters
- F(s): 35Hz
- Q(ms): 10.351
- V(as): 205 liters
- M(ms): 215 grams
- R(ms): 4.568 Kg/s
- S(d): 1225 sq.c+C5m
- V(d): 1.225 liters
- R(e): 5.7 ohms
- Q(es): 0.427
- C(ms): 0.0962 mm/N
Q(ts): 0.412 - L(e): 1KHz: 1.98mH
- BL: 25.1
- n(0): 2.03%
